• sk
Kategórie

Fluke PM6303 - RCL Meter

Fluke PM6303 - RCL Meter


Poslať známemu


Cenu a info nájdete na www.elso.sk
Fluke PM6303 - RCL Meter


RCL Meter

Effective, economic testing that's quick and easy to use

The PM 6303A is quick and simple to operate, on the manufacturing floor as a quality assurance tool or in the service lab for quick tests of a wide variety of components. Its simple operation and 0.25% basic accuracy make the PM 6303A equally at home in the classroom for education and training environments.

PM 6303A/01 RCL Meter (1kHz)

Technical Specifications
AC test mode
Test frequency: 1 kHz
Test frequency accuracy: 0.025%
Test signal level: 2V via 400Ω source
Basic measurement accuracy: 0.25% ± 1 digit
DC bias
Internal: 2V
Maximum measurement ranges
Impedance/Resistance Z or RAC: 0.000Ω to 200 MΩ
Capacitance C: 0.0 pF to 100 mF
Inductance L: 0.0 mH to 32 kH
Quality factor Q: : 0.0002 to 500
Dissipation factor D: 0.002 to 500
Phase angle F: -90.0 to +90.0 deg
Maximum resolution
Impedance/Resistance Z or RAC: 01 MΩ
Capacitance C: 0.1 pF
Inductance L: 0.1 mH
Quality factor Q: 0.001
Dissipation factor D: 0.001
Phase angle F: 0.1 deg
Circuit diagram
  7 different equivalent circuit diagrams
Auto mode
Read-out: Dominant parameter
Equivalent circuit diagram: Parallel for R+C
  Serial for R+L
Manual Mode
Read-out: Dominant or secondary parameter
Equivalent circuit diagram: Parallel or serial selectable
Measurement update rate
  2 measurements/s
Trim function
Open circuit: Open circuit compensation
  Z > 100 kΩ
Short circuit: Short circuit compensation
  Z < 10Ω
Stored settings (non-volatile memory)
Front panel settings: 1 (trim figures included)
Calibration Interval
  1 year
Environmental Conditions
Operating temperature: 0°C to 50°C
Storage temperature: -40°C to 70°C
Power requirements: 100/120/220/240V ± 10%
Line frequency: 50 to 100 Hz
Power consumption: 16 VA
Safety: According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2
EMC: According to CE regulation 89/336: Emission according to EN 55011, Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4
Warm-up time: 5 minutes
Dimensions and weight
W x H x D: 315 x 105 x 401 mm (12.4 in x 4.13 in x 15.9 in)
Weight: 3.8 kg (8.4 lb)




14 produktov v rovnakej kategórii: